MCU: 216MHz STM32F722RET6

IMU: MPU6000 (SPI)

Baro: BMP280 (I2C)

OSD: AT7456E (SPI)

Blackbox: MicroSD card slot (SPI)

5x Uarts (1,2,3,4,6) with built-in inversion

1x Softserial-Tx

2x Motors, 6x Servos outputs

1x I2C

4x ADC (VBAT, Current, RSSI, AirSpeed)

3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)

Switchable Dual Camera Inputs

Switchable 5V 9V for Camera VTX

High-precision Current Sense

TR SA VTX control: Yes

WS2812 Led Strip : Yes

Beeper : Yes

RSSI: Yes

Analog Airspeed sensor: Yes

Digital Airspeed sensor: Yes

FC Firmware

INAV Flight BetaFlight

Target: MATEKF722SE

PDB

Input voltage range: 9~36V (3~6S LiPo) w TVS protection

2x ESC power pads

Battery Voltage Sensor: 1:10 (Scale 1100)

Current Senor: 132A,  3.3V ADC,  Scale 250

BEC 5V output

Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeed

Continuous current: 2 Amps, Max.3A

BEC 9V 12V output

Designed for Video Transmitter, Camera, Gimbal ect.

Continuous current: 2 Amps, Max.3A

12V option with Jumper pad

BEC Vx output

Designed for Servos

Voltage adjustable, 5V Default, 6V or 7.2V via jumper

Continuous current: 5 Amps, Max.6A

Output Ripple: 50mV (VIn=24V, VOut=5V@5A load)

BEC 3.3V output

Designed for Baro Compass module and Spektrum RX

Linear Regulator

Continuous current: 200mA

Physical

Mounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mm

Dimensions: 54 x 36 x 13 mm

Weight: 25g