-50%

SP RACING F3 EVO V2.0 Brush Flight Control Board For Tiny 90mm 120mm 125mm FPV Micro Quadcopters Better than Scisky 32bits Online now

Original price was: $295.99.Current price is: $148.00.
0 reviews
22 people are viewing this right now
Estimated Delivery:
16 - 23 Mar, 2025
Trust Badge
Guaranteed safe & secure checkout

Description

SP RACING F3 EVO V2.0 Brush Flight Control Board For Tiny 90mm 120mm 125mm FPV Micro Quadcopters Better than Scisky 32bits

The latest version F3_EVO_BRUSHED brush flight control support 6-axis aircraft, operating current of each shaft can be up to 10A or above, improved blood pressure booster module, can reach to 500mah constand current output by using UART1 or UART2 output 5V, can meet the low-power diagram as 25mw FPV camera, support LED_STRIP function.

 

Caution:

1, the propeller must be removed before doing brush flight control program or calibration;

2, flight control by default brush F3 EVO 1.13.0 programs, if you want re-brush firmware, please write set motor_pwm_rate=1000 in the CLI command control line of CF configuration software , and enter the Save command to save!

3. Set the throttle set the maximum value of 2000, can effectively increase the flight time. 

  

 

F3 EVO V2.0 Brushed Flight control:

 

Specifiations:

 

Dimension: 22mm*32.5mm

 

Thickness: 1.2mm

 

Weight: 3g

 

 

Features:

 

1, F3_EVO_Brush revision is out of the F3 EVO SP RACING based on is based on a SP RACING F3 EVO firmware 32 brush flight control;

 

2, Improve the power supply input scheme, so that flight control support 1S (4.2V) and 2S (8.4V) power supply, 2S power can bring more violent flying experience. Individually designed circuit configuration, comes with Buck booster technology, or both 1S 2S power input, UART1 2 3 output 5V, DSM output 3.3V;

 

3, Using STM32F303CCT6 + MPU6500, advanced hardware platform F3 guarantee more stable flight;

 

4, With a large current NMOS transistors, operating current of up to 10A per channel or more. Each motor and is equipped with a freewheeling diode;

 

5, Support for PPM, SBUS, DSM receiver input signal;

 

6, With battery voltage detection and buzzer interface;

 

7, Support for the current world face almost all coreless motors, including the 1020 and other behemoths of the hollow cup.

 

 

Receiver configuration:

 

1. DSM DSM receiver can solder directly to the interface 3.3V, GND, RX3, CF the software configuration UART3.

2. PPM and SBUS receiver can weld to the UART2 GND, + 5V, RX2 above, SBUS signal CF in the software configuration.

 

Before applying power, pay attention to the battery voltage selection:

The default shipping is 1S (4.2V); 2S first need to disconnect the short contacts 1S, 2S and then connect two pads short. Prohibit the same three pads shorted together.

HTB1ACxoNXXXXXa4XXXXq6xXFXXXR
F18730-SP-RACING-F3-EVO-Brush-Flight-Controller-Control-Through-Indoor-Coreless-For-Tiny-FPV-RC
Micro-32bits-F3-EVO-V2-0-Brushed-Flight-Control-Board-Based-On-SP-RACING-F3-EVO
F18730-SP-RACING-F3-EVO-Brush-Flight-Controller-Control-Through-Indoor-Coreless-For-Tiny-FPV-RC
HTB19vZQMVXXXXXWapXXq6xXFXXXp

 

 

Related products

postuslocal.shop © 2025 All Rights Reserved

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Description
  • Weight
  • Dimensions
  • Additional information
  • Add to cart
Click outside to hide the comparison bar
Compare